- Permits combined operation of fail-safe signal modules in safety mode and standard S7-300 modules in the same ET 200M system.
- The safety protector is not required if the safety class SIL 3 or safety category <, Cat. 4 is to be achieved.
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.
SIPLUS S7-300 TRENNBAUGRUPPE
Standards, approvals, certificates
Yes, File E239877
Yes, CofC 3028431
Ambient temperature during operation
-25 °C, = Tmin
60 °C, = Tmax
Ambient temperature during storage/transportation
Extended ambient conditions
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
100 %, RH incl. condensation/frost (no commissioning under condensation conditions)